Stage technique is more suitable for amateurs than a short pendulum, main thing is simplicity and practicality - length of twine on right.
In previous posts, we've already talked about different ways of returning, such as slow rubbing, fast rubbing, pushing and pulling, and short backswings. Fast-slow rubbing and push-pull have good stability, but slightly weaker offensiveness, and short-swing control is good, but it's not easy for us amateurs. enemy. Therefore, we can choose a more depressing technique for handling short balls in play, i.e. a long split.
Dividing length is not offensive in itself, it refers to technical aspects of ball friction. The difference between cutting length and rubbing length is mainly that cutting length has a higher suddenness in speed, and rubbing arc is longer, and rotation is guaranteed on this basis; whereas length of rubbing should primarily provide rotation, which is their main difference between. In real combat, both non-spinning and spinning balls on table can be used with split length technology. If used correctly, this technique will limit opponent's attack or cause opponent's attack error.
From point of view of technical movements, sweep on right is similar to swing on right. Only when dealing with short balls on table is first step forward. The right foot must be inserted into table, and right foot body's center of gravity must be reached Follow, press center of gravity to right foot, do not lose contact with racket, position of racket must be placed in front of you, and it must be very close to ball , don't just move your center of gravity up without following it, so you can control ball you just dropped.
At same time, it is necessary to reduce range of racquet, and range of racquet must be very small. At same time, length of twine must be reached during lifting period in order to emphasize surprise and stealth at moment of impact. The wrist should be relatively fixed when hitting ball, if wrist is used too much, control and stability of ball will not be enough.
In process of swinging racket, it mainly relies on force of forearm. In process of swinging racket, speed should not be too uniform. There should be acceleration at moment ball is hit, threat to opponent is also greatly reduced, and split length characteristics cannot be distinguished .
When swinging racquet, it must be based on rotation. For example, if ball is not spinning too much, shape of plate should be relatively backward. Compared to a spinning ball, shape of plate should be tilted back, move racket back a little more, and then send it forward a little more.
In order to adjust shape of blade for a long split, you need to have a better idea of the rotation of incoming ball. You cannot hit ball with any type of spin. Error. If it is a reverse spin ball, shape of plate should be slightly back and it can be rubbed straight forward and down. If it is a non-spin ball, shape of plate should be as vertical as possible and downward force should be greater to control arc ball.
Finally, you should pay attention to choice of landing point in a long swing. As a rule, you can choose a large angle of swing or body position in the chase. Restoration of pace and movement, always ready for a topspin stalemate.
Ping pong pure boiled water
November 19, 2023